Last revisions: Fixed some potential shortcomings with grounding. Added a little copper island on the other side behind the phase wire pads on the edge. Stitched to the pad with 3 vias.
The idea here is to make the phase wire pad more rugged against lifting, this is common to use vias for this purpose in drone ESC boards. It also adds a small extra thermal area and mass to the lowside device.
I decided to mothball the LC Mini for now and focus on getting this beastie spooled up first. It will also be my potential dev board for the 6EDL04/ace.hex target before doing the mountable version.
No comments:
Post a Comment